欢迎光临制药机械制药设备制药流程用品一站式采购【宝正网】!   登录注册我的订单宝正机械
客服热线:029-82200091   关注宝正网

关注宝正网

首页 > 新闻资讯 > 行业标准 > 中国软管标准

浏览历史

中国软管标准

宝正网-制药机械设备【www.baozheng360.com】 / 2014-08-08

   软管是现代工业中的重要部件。软管主要用作电线、电缆、自动化仪表信号的电线电缆保护管和民用淋浴软管,规格从3mm到150mm。小口径软管(内径3mm-25mm)主要用于精密光学尺之传感线路保护、工业传感器线路保护。那么,中国软管有哪些标准呢?

  中国软管标准:

  FZ/T 93051-1998前纺和细纱机械上罗拉包覆物--胶管

  GB 10543-2003飞机地面加油和排油用橡胶软管及软管组合件Rubber hose and hose assemblies for aircraft ground fuelling and defuelling

  GB 15090-2005消防软管卷盘Fire hose reel

  GB 16897-1997制动软管Brake hose

  GB 20414-2006机动车用液化石油气的橡胶软管和软管组合件Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles―Specification

  GB 20689-2006分配液化石油气(LPGs)用橡胶软管及软管组合件规范Rubber hoses and hose assemblies for dispensing liquefied petroleum gases(LPGs) - Specification

  GB 4491-2003橡胶输血胶管Rubber transfusion tubes

  GB 6969-2005消防吸水胶管Rubber suction hose for fire-flighting purpose

  GB 7128-1986汽车气压制动胶管Rubber hose for automotive air brake system

  GB 7542-2003铁路机车车辆制动用橡胶软管Rubber brake hoses for railway locomotive and car

  GB/T 10541-2003近海停泊排吸油橡胶软管Rubber hose,oil suction and discharge,offshore mooring

  GB/T 10544-2003钢丝缠绕增强外覆橡胶的液压橡胶软管和软管组合件Rubber hoses and hose assemblies--Rubber-covered,spiral wire reinforced,hydraulic type

  GB/T 10546-2003液化石油气(LPG)用橡胶软管和软管组合件散装输送用Rubber hoses and hose assemblies for liquefied petroleum gases(LPG)--Bulk transfer application

  GB/T 11182-2006橡胶软管增强用钢丝Steel wire for rubber hose reinforcement

  GB/T 1186-2007压缩空气用织物增强橡胶软管Rubber hoses,textile-reinforced,for compressed air-Specification

  GB/T 12721-2007橡胶软管 外覆层耐磨耗性能的测定Rubber hoses - Determination of abrasion resistance of the outer cover

  GB/T 12722-1991橡胶和塑料软管组合件屈挠液压脉冲试验(半Ω试验)Rubber and plastics hose assemblies--Flexing combined with hydraulic impulse test (Half omega test)

  GB/T 12756-1991胶管用钢丝绳Steel wire ropes for rubber hose

  GB/T 14525-1993波纹金属软管通用技术条件General specification for corrugated metallichose assemblies

  GB/T 14652.1-2001小艇耐火燃油软管Small craft--Fire-resistant fuel hoses

  GB/T 14652.2-2001小艇非耐火燃油软管Small craft--Non-fire-resistant fuel hoses

  GB/T 14904-1994钢丝增强的橡胶、塑料软管和软管组合件屈挠液压脉冲试验Rubber and plastics hose and hose assemblies--Wire reinforced--Hydraulic impulse test with flexing

  GB/T 14905-1994橡胶和塑料软管各层间粘合强度测定Rubber and plastics hose--Determination of adhesion between components

  GB/T 15329.1-2003橡胶软管及软管组合件织物增强液压型第1部分:油基流体用Rubber hosesand hose assemblies--Textile-reinforced hydraulic types--Specification--Part 1: Oil-based fluid applications

  GB/T 15907-1995橡胶、塑料软管燃烧试验方法Rubber and plastics hoses--Method of testfor flammability

  GB/T 15908-1995织物增强液压型热塑性塑料软管和软管组合件Plastics hose and hose assemblies--Thermoplastics,textile-reinforced,hydraulic type

  GB/T 16591-1996输送无水氨用橡胶软管及软管组合件Rubber hose and hose assemblies for transferring anhydrous ammonia

  GB/T 16693-1996软管快速接头Quick hose’s connection

  GB/T 17604-1998橡胶管道接口用密封圈制造质量的建议疵点分类与类别Rubber--Recommendations for the workmanship of pipe joint rings--Description and classification of imperfections

  GB/T 18422-2001橡胶和塑料软管及软管组合件透气性的测定Rubber and plastics hoses andhose assemblies--Determination of permeability to gas

  GB/T 18423-2001橡胶和塑料软管及非增强软管液体壁透性测定Rubber and plastics hoses and tubing--Determination of transmission of liquids through hose and tubing walls

  GB/T 18424-2001橡胶和塑料软管氙弧灯曝晒颜色和外观变化的测定Rubber and plastics hoses--Exposure to a xenon arc lamp--Determination of changes in colour andappearance

  GB/T 18425-2001蒸汽橡胶软管试验方法Rubber hoses for steam--Test methods

  GB/T 18615-2002波纹金属软管用非合金钢和不锈钢接头Non-alloyed and stainless steel fittings for corrugated flexible metallic hoses

  GB/T 18616-2002爆炸性环境保护电缆用的波纹金属软管Corrugated flexible metallic hose assmeblies for the protection of electrical cables in explosive atomspheres

  GB/T 18947-2003矿用钢丝增强液压软管及软管组合件Rubber hoses and hose assemblies for underground mining--Wire-reinforced hydraulic type

  GB/T 18948-2003轿车和轻型商用车辆冷却系统用纯胶管和橡胶软管Rubber--Coolant hoses and tubing for use on private cars and light commercial vehicles--Specification

  GB/T 18948-2003轿车和轻型商用车辆冷却系统用纯胶管和橡胶软管Rubber--Coolant hoses and tubing for use on private cars and light commercial vehicles--Specification

  GB/T 18949-2003橡胶和塑料软管动态条件下耐臭氧性能的评定Rubber and plastics hoses--Assessment of ozone resistance under dynamic conditions

  GB/T 18950-2003橡胶和塑料软管静态下耐紫外线性能测定Rubber and plastics hoses--Determination of ultra-violet resistance under static conditions

  GB/T 19090-2003矿用输送空气和水的织物增强橡胶软管及软管组合件Rubber hoses and hose assemblies for underground mining--Textile-reinforced air and water type

  GB/T 20023-2005无气喷涂用橡胶和/或塑料软管及软管组合件Rubber and/or plastics hoses and hoses assemblies for airless paint spraying

  GB/T 20024-2005内燃机用橡胶和塑料燃油软管可燃性试验方法Rubber and Plastics hoses for fuels for internal-combustion engines -- Method of test for flammability

  GB/T 20025.2-2005汽车空调用橡胶和塑料软管及软管组合件耐制冷剂134aRubber and plastics hoses and hose assemblise for automotive air conditioning -- Refrigerant 134a

  GB/T 20026-2005橡胶和塑料软管内衬层耐磨性测定Rubber and plastics hose -- Determination of abrasion of lining

  GB/T 20461-2006汽车动力转向系统用橡胶软管和软管组合件规范Rubber hoses and hose assemblies for automobile power-steering systems ―Specification

  GB/T 20462.1-2006汽车用热塑性非增强软管和软管第1部分: 非燃油用Thermoplastic tubing and hoses for automotive use―Part 1: Non-fuel applications

  GB/T 20462.2-2006汽车用热塑性非增强软管和软管 第2部分: 石油基燃油用Thermoplastic tubing and hoses for automotive use―Part 2:Petroleum-based-fuel applications

  GB/T 21400.2-2008绞盘式喷灌机 第2部分: 软管和接头 试验方法

  GB/T 21476-2008船舶与海上技术 软管组件的耐火性能 试验台要求

  GB/T 21477-2008船舶及海上技术 软管组件的耐火性能 试验方法

  GB/T 2351-2005液压气动系统用硬管外径和软管内径Fluid power systems and components-Connectors and associated components-Nominal outside diameters of tubes and nominal inside diameters of hoses

  GB/T 2550-2007气体焊接设备 焊接、切割和类似作业用橡胶软管Gas welding equipment - Rubber hose for welding, cutting and allied processes

  GB/T 3683.1-2006橡胶软管及软管组合件钢丝编织增强液压型规范第1部分:油基流体适用Rubber hoses and hose assemblies―wire-braid-reinforced hydraulic types―specification―Part 1:Oil-based fluid applications

  GB/T 5009.79-2003食品用橡胶管卫生检验方法Hygienic analysis method of rubber hose for food use

  GB/T 5107-1985焊接和切割用软管接头Hose connection for equipment for welding and cutting

  GB/T 5563-2006橡胶和塑料软管及软管组合件 静液压试验方法Rubber and plastics hoses and hose assemblies - Hydrostatic testing

  GB/T 5564-2006橡胶及塑料软管 低温曲挠试验Rubber and plastics hoses - Subambient temperature flexibility tests

  GB/T 5565-2006橡胶或塑料增强软管和非增强软管 弯曲试验Rubber or plastics hoses tubing - Bending tests

  GB/T 5566-2003橡胶或塑料软管耐压扁试验方法Rubber or plastics hoses--Test method for crush resistance

  GB/T 5567-2006橡胶和塑料软管及软管组合件 耐吸扁性能的测定Rubber and plastics hoses and hose assemblies - Determination of suction resistance

  GB/T 5568-2006橡胶或塑料软管及软管组合件 无挠曲液压脉冲试验Rubber or plastics hoses and hose assemblies - Hydraulic impulse test without flexing

  GB/T 7113-2003绝缘软管定义和一般要求Flexible insulating sleeving--Definitions andgeneral requirements

  GB/T 7113.2-2005绝缘软管 试验方法Flexible insulating sleeving Methods of test

  GB/T 7127.1-2000使用非石油基制动液的道路车辆液压制动系统用制动软管组合件Brake hose assemblies for hydraulic braking systems of road vehicles used with non-petroleum-base brake fluid

  GB/T 7127.2-2000使用石油基制动液的道路车辆液压制动系统用制动软管组合件Brake hose assemblies for hydraulic braking systems of road vehicles used with petroleum-base brake fluid

  GB/T 7129-2001橡胶或塑料软管容积膨胀的测定Rubber or plastics hoses--Determinationof volumetric expansion

  GB/T 7528-2002橡胶和塑料软管及软管组合件术语Rubber and plastics hoses and hose assemblies--Vocabulary

  GB/T 7939-2008液压软管总成 试验方法

  GB/T 9065.1-1988液压软管接头连接尺寸扩口式Hydraulic fluid power--Hose connector--Connecting dimension (Part 1--Flare type)

  GB/T 9065.2-1988液压软管接头连接尺寸卡套式Hydraulic fluid power--Hose connector--Connecting dimension (Part 2--Insert type)

  GB/T 9065.3-1988液压软管接头连接尺寸焊接式或快换式Hydraulic fluid power--Hose connector--Connecting dimension (Part 3--Welding or quick-action type)

  GB/T 9572-2001橡胶和塑料软管及软管组合件电阻的测定Rubber and plastics hoses and hose assemblies--Determination of electrical resistance

  GB/T 9573-2003橡胶、塑料软管及软管组合件尺寸测量方法Rubber and plastics hose and hose assemblies--Methods of measurement of dimensions

  GB/T 9574-2001橡胶和塑料软管及软管组合件试验压力、爆破压力与设计工作压力的比率Rubber and plastics hoses and hose assemblies--Ratios of proof and burst pressure to design working pressure

  GB/T 9575-2003工业通用橡胶和塑料软管内径尺寸及公差和长度公差Rubber and plastics hoses for general-purpose industrial applications--Bore diameters and tolerances,and tolerances on length

  GB/T 9576-2001橡胶和塑料软管及软管组合件选择、贮存、使用和维护指南Rubber and plastics hose and hose assemblies--Guide to selection,use,and maintenance

  GB/T 9577-2001橡胶和塑料软管及软管组合件标志、包装和运输规则Rubber and plastics hose and hose assemblies--Rules for marking,package and transportation

  GB/Z 18427-2001液压软管组合件液压系统外部泄漏分级Hydraulic hose assembies--External leakage classification for hydraulic systems

  HG 2486-1993家用煤气软管

  HG/T 2183-1991耐稀酸碱橡胶软管

  HG/T 2184-2008通用输水织物增强橡胶软管

  HG/T 2185-1991橡胶软管外观质量

  HG/T 2192-2008喷砂用橡胶软管-规范

  HG/T 2193-2008洗衣机和洗碗机橡胶软管和软管组合件 进水软管规范

  HG/T 2300-1992织物增强可折叠式通用输水塑料软管

  HG/T 2301-2008压缩空气用织物增强热塑性塑料软管

  HG/T 2490-1993排吸泥橡胶软管

  HG/T 2491-1993汽车用输水橡胶软管

  HG/T 2540-1993内燃机车机油橡胶软管

  HG/T 2603-1994双面胶管成型机

  HG/T 2718-1995汽车空调用橡胶和塑料软管及软管组合件

  HG/T 3037-2008计量分配燃油用橡胶和塑料软管及软管组合件

  HG/T 3038-2008岸上排吸油橡胶软管

  HG/T 3039-2008船/码头输油用橡胶软管

  HG/T 3042-1989内燃机燃油系统输送常规液体燃油用橡胶软管和纯胶管

  HG/T 3042-1989内燃机燃油系统输送常规液体燃油用橡胶软管和纯胶管

  HG/T 3045-2008排吸用螺旋线增强的热塑性塑料软管

  HG/T 3324-1981铁路蒸汽机车用给水胶管

  HG/T 3842-2006消防用不可折叠型橡胶和塑料软管 第1部分:定位应急设施用轴卷半硬性软管

  JB/T 10637-2006农林拖拉机和机具 高温低压输油胶管Rubberized Oil Tube of Hi-temperature and low pressure for Agriculture and forest tractor and machinery

  JB/T 10708-2007胶管接头扣压机

  JB/T 10759-2007工程机械 高温高压液压软管总成Construction machinery-High temperature and high pressure hydraulic fluid power hose assemblies

  JB/T 10799-2007软管灌装封尾机Soft tube filling and sealing machine

  JB/T 6015-2000柴油机低压输油胶管 技术条件

  JB/T 6142.1-2007锥密封钢丝编织胶管总成

  JB/T 6142.2-2007锥密封90o钢丝编织胶管总成

  JB/T 6142.3-2007锥密封双90o钢丝编织胶管总成

  JB/T 6142.4-2007锥密封45o钢丝编织胶管总成

  JB/T 6143.1-2007锥密封棉线编织胶管总成

  JB/T 6143.2-2007锥密封90°棉线编织胶管总成

  JB/T 6143.3-2007锥密封双90°棉线编织胶管总成

  JB/T 6143.4-2007锥密封45°棉线编织胶管总成

  JB/T 6144.1-2007锥密封胶管总成 锥接头

  JB/T 6144.2-2007锥密封胶管总成 55°非密封管螺纹锥接头

  JB/T 6144.3-2007锥密封胶管总成 55o密封管螺纹锥接头

  JB/T 6144.4-2007锥密封胶管总成 60°密封管螺纹锥接头

  JB/T 6144.5-2007锥密封胶管总成 焊接锥接头

  JB/T 6145-2007钢丝、棉线编织胶管总成

  JB/T 8151.1-1999绝缘软管规范 各种型号软管的规范要求 硅橡胶玻璃纤维软管

  JB/T 8151.2-1999绝缘软管规范 各种型号软管的规范要求 聚氯乙烯玻璃纤维软管

  JB/T 8151.3-1999丙烯酸酯玻璃纤维软管

  JB/T 8406-2008工程机械 高温低压输油胶管

  JB/T 8512-1996输水用涂塑软管

  JB/T 8727-2004液压软管 总成

  JC 886-2001卫生设备用软管

  MT 191-1989(2005)煤矿井下用橡胶管安全性能检验规范

  MT/T 98-2006液压支架用软管及软管总成检验规范

  NF L43-582-1966飞行器液体装置.橡胶管接头.(RECH.)(AIRCRAFT FLUID INSTALLATIONS. CONNECTORS FOR RUBBER HOSE. (RECH.).)

  NF L43-587-1973橡胶管接头.ISO 米制螺纹剖面和公差(RUBBER HOSE CONNECTIONS. ISO METRIC THREAD PROFILE AND TOLERANCES.)

  NF T47-204-1969橡胶.合成橡胶管或软管.用浸渍或接触法测定管抗液体作用的能力(RUBBER AND SIMILAR ELASTOMERS. RESISTANCE OF TUBES AND PIPES TO THE ACTION OF LIQUIDS BY CONTACT OR IMMERSION. (TESTING METHODS).)

  QB/T 1822-1993软管螺纹机

  QB/T 2026-1994软管滚涂油墨

  QB/T 2901-2007牙膏用铝塑复合软管Aluminium and plastic laminated tubing for toothpaste

  QC/T 619-1999(2005)B型和C型蜗杆传动式软管环箍

  QC/T 620-1999(2005)A型蜗杆传动式软管环箍

  QC/T 664-2000(2005)汽车空调(HFC-134a)用软管及软管组合件

  QC/T 745-2006液化石油气汽车橡胶管路Rubber pipelines for liquefied petroleum gas vehicles

  QC/T 764-2006汽车液压制动系 金属管、内外螺纹管接头和软管端部接头

  SB/T 10355-2002制冷系统和热泵—软管件、隔振器和膨胀接头—要求、设计与安装

  XP D36-112-2000家政学.使用汽缸或单个油箱里的丁烷或丙烷的家庭装置外部连接用(增强)挠性橡胶管(Household economy - (Reinforced) flexible rubber tubing for the external connection of domestic appliances using butane or propane from cylinders or individual tanks.)

  XP D36-114-2000家用经济.使用丙烷和丁烷的装置外连接用增强橡胶管(Household economy - (Reinforced) rubber tubing for the external connection of appliances using butane or propane.)

  YB/T 023-1992(2005)金属软管用碳素钢冷轧钢带

  YB/T 5306-2006P3 型镀锌金属软管

  YB/T 5307-2006S型钎焊不锈钢金属软管

用户评论(共0条评论)

  • 暂时还没有任何用户评论
总计 0 个记录,共 1 页。 第一页 上一页 下一页 最末页
用户名: 匿名用户
E-mail:
评价等级: 评价等级 评价等级 评价等级 评价等级 评价等级
评论内容:
验证码: captcha
关于宝正 | 联系我们 | 支付方式 | 配送方式 | 售后服务 | 留言板

Copyright © 2005-2018 陕西宝正机械有限公司版权所有,并保留所有权利。客服热线:029-82200091
ICP备案证书号:陕ICP备18017856号-1 西咸新区泾河新城美国科技产业园

网络诚信联盟认证   可信网站示范单位   工商营业执照   网络110   支付宝合作单位   财付通诚信商家